Boss PTO Rotary Screw Air Compressors & Generators

Vehicle Integrated Compressors

• Underdeck PTO 8060-UBI – When you utilize a Boss PTO air compressor on your crew trucks, you gain a decisive edge, because the PTO air compressor components become an essential part of the vehicle.  They are mounted below the bed and offer many advantages you cannot get when using conventional air compressors. The 8060-UBI takes up no space, frees up your tow hitch, and is cost efficent.  In addition, the compressor is lightweight, having fewer parts and runs off a vehicle engine. If the truck runs, the compressor runs when activated! The advanced design allows you the option to choose up to 185 CFM and up to 220 PSI. Generators, welders, and hydraulic systems may be intergrated with the 8060-UBI kit or in-house installation.
• Underdeck PTO 80100-UBI – The 80100-UBI takes up no space, frees up your tow hitch, and is cost efficent.  In addition, the compressor is lightweight, having fewer parts and runs off a vehicle engine. If the truck runs, the compressor runs when activated! The advanced design allows you the option to choose up to 85 CFM and up to 150 PSI. Generators, welders, and hydraulic systems may be intergrated with the 80100-UBI kit or in-house installation.
• Underdeck PTO 375-UBI – The 375-UBI takes up no space, frees up your tow hitch, and is cost efficent.  In addition, the compressor is lightweight, having fewer parts and runs off a vehicle engine. If the truck runs, the compressor runs when activated! The advanced design allows you the option to choose up to 375 CFM and up to 110 PSI continuously. Generators, welders, and hydraulic systems may be intergrated with the 375-UBI kit or in-house installation.
• Underdeck Hydraulic 8060-UHBI –
  The 8060-UHBI takes up no space, frees up your tow hitch, and is cost efficent.  In addition, the compressor is lightweight, having fewer parts and runs off a vehicle engine. If the truck runs, the compressor runs when activated!
  The advanced design allows you the option to choose up to 185 CFM and up to 220 PSI. Generators, welders, and specifically hydraulic systems are intergrated with the 8060-UHBI kit or in-house installation.
• Underdeck Hydraulic 80100-UHBI – The 80100-UHBI takes up no space, frees up your tow hitch, and is cost efficent.  In addition, the compressor is lightweight, having fewer parts and runs off a vehicle engine. If the truck runs, the compressor runs when activated! The advanced design allows you the option to choose up to 85 CFM and up to 150 PSI. Generators, welders, and specifically hydraulic systems are intergrated with the 80100-UHBI kit or in-house installation.

Hydraulic Drive Compressors

• 80201-AHBI – The Boss 80201-AHBI advanced design allows you the option to choose any CFM output up to 185 CFM with just one model.  By simply adjusting the hydraulic flow, the compressor system will produce up to 185 CFM at 110 PSIG continuously.  Now, when you need that extra boost, you have it. The Boss 80201-AHBI modular unit is fully self-contained and compact.  Mounted on its own frame the unit measures only 26” W x 31 1/8” H x 35 ¼ L.  The compact design makes mounting possible even in tight spaces. Installation is simple too.  Just attach the unit to the deck of you vehicle, connect your hydraulic system, wire to a 12V source and you are ready to go.
• Infinity – The Boss INFINITY 60 is a compact, strategically designed system.  It integrates all major components on a single frame, which is enclosed in a tough, weather-resistant canopy.
  The INFINITY 60’s rotary screw design guarantees continuous output of up to 60 CFM at 150 PSI.  With built-in access ports and a hinged canopy panel, virtually all components are accessible for maintenance and service.The INFINITY 60 also has enhanced safety features offering applications designed to protect your most valuable resource- your operating crew.
• Series 35 – The Boss Series 35 hydraulic rotary screw series is a compact, strategically designed system. It incorporates the latest rotary screw technology to deliver instant pressure and continuous output, of 35 CFM- 175 PSI.
  The Series 35 integrates all major components on a single frame.  It creates ease for maintenance and service with built-in access ports and a hinged canopy panel, virtually all the components are accessible. The Series 35 simple installation and flexible configurations are engineered to allow the compressor to fit just about anywhere on your crews truck body.

Engine Drive Compressors

• Diesel Utility Skid – This Boss Utility Skid incorporates a diesel engine driven, skid mounted air compressor with all the accessories. This Boss application is usually mounted to the customers vehicle for various tasks such as paint striping, vacuum systems, and air tools. It can be tied into the truck fuel system or have a separate fuel tank for operation.
  The DUS integrates a 4-cycle, 4-cylinder, John Deere engine, with reserve horsepower when operating compressor at rated capacity and pressure.  The rate capacity of not more than 250 CFM free air delivered at a minimum pressure of 100 PSIG when operating at rated speed.
• Bullet 70 – The Boss Bullet 70 offers a high caliber performance from a high caliber machine.  The Bullet is a fully self-contained, gas engine driven rotary screw air compressor. It’s capable of producing 70 CFM and 100 PSI continuously, with plenty of reserve. Its unique design, allow you to utilize the Bullet just about anywhere. The Boss Bullet features make this engine the most fuel efficient, quiet running, and maintenance free in its class.
• RX-70 – The RX-70 is a fully self-contained, gas engine driven rotary screw air compressor. It’s capable of producing 70 CFM at 100 PSI continuously. The RX-70 utilizes Honda 4-cycle, a V-twin overhead valve, electric and recoil start.  It has an aero-dynamically designed cooling package with an automatic thermal sensing control to ensure proper operating temperatures.

Vehicle Integrated Generators

• Underdeck BGSD – When you utilize a Boss BG series PTO generator on your crew trucks you gain a decisive edge, because the BG series PTO generator components become an integral part of the vehicle. The Boss PTO is mounted below the bed, offering many advantages you cannot get using a conventional engine driven generators or invertors. The Boss BG series takes up no bed space and contains only one engine to maintain.  It has fewer parts and gives the generator mobility. The Boss Model BGSD is ideal for plastic pipe fusion, night lighting, pumps, heaters, heating irons, electrical tools, sensitive computer equipment and more.
• Underdeck BG PowerMax – AC Generator – With the installation of plastic pipes in the gas utility industry as the norm, the need to have a dependable source of electricity to power fusion equipment becomes a concern. Not with the Boss BG Powermax. Designed to run in conjunction with either our UBI side mount or IBI split-shaft drive air compressors, the BG Powermax provides a continuous and uninterrupted source of electrical power. Its compact size frees up valuable space on utility vehicle and eliminates another engine to maintain when utilizing a standalone engine driven generator.  The completely brushless design makes this unit ideal for fairly dirty or wet environments. The BG Powermax’s uses include but are not limited to: fusion, night lighting, pumps, heaters, electrical tools, sensitive testing equipment and many more applications.
• Underdeck BG PowerMax – Parellel Shaft – The Boss BGPSD is a revolutionary 3-in-1 package that includes a constant 185 CFM output rotary screw underdeck air compressor, 6,200-watt A/C generator, and an optional 10 GPM hydraulic pump operated of a single power take-off (PTO) opening. The BGPSD uses no belts, but a direct gearbox drive.  It has a dual input shaft allowing flexibility for either clockwise or counter-clockwise rotating PTOs with one compressor package.
  The 8060-UBI BGPSD is the answer to driving all your equipment needs in one flexible and simple gearbox design.