Highway FD-50 Foundation Drill

“FD-50” Foundation Pressure Drill

ENGINE:

• John Deere 4045T, Balanced diesel engine 125 HP
• Rated Torque: 328 ft/lbs / 445 Nm
• Fuel: Diesel
• Cooling: Water

TRANSMISSION:

• Make: Funk
• Model: 2000 Series
• Speeds: 3 Forward / 3 Reverse

TORQUE RATING:

• 1st Gear: 61,166 ft/lbs / 82.94 kNm
• 2nd Gear: 26,376 ft/lbs / 35.77 kNm
• 3rd Gear: 10,562 ft/lbs / 14.32 kNm

KELLY BAR:

• Outer Bar: 6” / 152.4 mm
• Solid Inner Bar: 4.25” / 107.95 mm

OUTER KELLY BAR:

• Crowd Force: 23,550 lbs / 104.6 Kn
• Control: Hydraulic reeving cylinder

INNER KELLY BAR WINCH:

• Make: Pullmaster
• Model: M-18
• Capacity: 18,000 lbs / 80.0 Kn
• Line Speed: 195 ft/min / 59 m/min (full drum)

SERVICE WINCH:

• Make: Pullmaster
• Model: PL-5
• Capacity: 5,000 lbs / 22.2 Kn
• Line Speed: 76 ft/min / 23 m/min (full drum)

AUGER CAPACITY:

• 72″ Intermittent
• 54″ Continuous

HOLE DEPTHS: (STANDARD)

• 50′

DRIVE GEARS:

• Spiral bevel gears delivering power to kelly bar through a 4
  roller drive assembly

ROTATION: (STANDARD)

• Bearing: Rotation ring gear, 53” diameter, gear
  reduction box with internal brake system

OUTRIGGERS:

• Rear Supports: Fixed, straight down jacks
• Front Supports: Hydraulic out and down jacks
• Rear Outrigger Spread: 90” / 2.3 m
• Front Outrigger Spread: 134” / 3.4 m

DIMENSIONS:

• Overall Unit Height: 9’ 6” / 2.92 m
• Overall Unit Width: 102” / 2.59 m
• Overall Unit Length: 32’ 4” / 9.85 m

MAST:

• Articulation Over Vertical: 10 degrees
• Side Articulation: 10 degrees left and right